Interlock is a non-profit organization that provides space for its members and the local community to develop and share their interests in science, technology, art, and culture.
Building a Vacuum Forming Rig: Part 1
One of the tools I will need for my Animatronic Avian project is a vacuum forming tool. To be honest, I've wanted one since I read an...
Posted by
BleuLlama
on Fri 07 December 2012
Electronic Timer Repair
Our kitchen timer has been acting up recently, and with Thanksgiving quickly approaching, I needed to do something about it. The push...
Posted by
BleuLlama
on Fri 30 November 2012
Eproms and SUCCESS!
This is a continuation of a previous article. Quick summary: I tried to build a device for dumping an EPROM via Arduino, and I...
Posted by
BleuLlama
on Wed 14 November 2012
Eproms and SUCCESS!
This is a continuation of a previous article. Quick summary: I tried to build a device for dumping an EPROM via Arduino, and I...
Posted by
BleuLlama
on Wed 14 November 2012
EPROMs And a failed project... for now.
One of the things that comes with working on a lot of projects is failure. Not everything works. I've had my share of projects that...
Posted by
BleuLlama
on Wed 07 November 2012
Amiga 1000 Repair
Amiga 1000 computer (1985) with an Amiga 3000 "pregnant" mouse. One of the fun things about owning retro computers is that you get to...
Posted by
BleuLlama
on Wed 17 October 2012
Amiga 1000 Repair
Amiga 1000 computer (1985) with an Amiga 3000 "pregnant" mouse. One of the fun things about owning retro computers is that you get to...
Posted by
BleuLlama
on Wed 17 October 2012
Building the BL-328 Computer: Part 1: Introduction and CPU
I recently decided to work on a physically small project. I decided to take the sort of ethics of the classic computer systems from the...
Posted by
BleuLlama
on Tue 16 October 2012
A Computer Controllable Pixel
A few years ago, I put in an order at Sparkfun, which included 8 1-Watt Luxeon LEDs. My original thought was that I would rebuild an...
Posted by
BleuLlama
on Wed 26 September 2012
3D Printing a Twisty Puzzle
I've been getting into twisty puzzles recently. Mainly Rubik's cubes, as well as cubes and puzzles by other companies and designers...
Posted by
BleuLlama
on Wed 16 May 2012
Page 3 / 4